Console Technician生產技術員--DCS方向--China ADN

Description:

INVISTA is bring the latest adiponitrile (ADN) technology to China to satisfy the strong, local demand for the nylon 6,6 intermediate chemical. A minimum 300,000-ton ADN plant is underway at an estimated investment more than $1 billion. The construction is targeted for 2020 and production would begin in 2023.

To support this INVISTA’s largest capital project, INVISTA Shanghai is hiring Console Technicians to prepare the Day 1 readiness of this ADN project and responsible for subsequent start-up and operation.

Roles and Responsibilities:

During Project:

• Trained in the ADN project 　　 and certified as a qualified console operator for Day 1 readiness.

接受AND項目培訓并成為一名合格的中控技術員

• Assist RSL and APL in the 　　 preparation of operational procedures and training documents (SOP/SOC).

協助班長和副班長編寫SOP 及SOC

• Assist RSL and APL in the 　　 training and certification of operators.

協助班長和副班長完成一線技術員的培訓及認證

• Participate in the DCS configuration 　　 and commission of OTS, complete the OTS training and certified.

參與OTS的DCS配置和調試，完成OTS培訓和認證

• Facilitate field operation 　　 inspection during construction and system hand over according to project 　　 schedule。

根據項目進度，協助現場施工操作檢查和系統移交

• Facilitate control loop 　　 testing and interlock system testing according to the project schedule.

根據項目進度，促進控制回路測試和聯鎖系統測試

• Participate in pre-commissioning 　　 and commissioning before start-up, complete the preparation of start-up.

參與啟動前的預調試和調試，完成啟動準備工作

• Assist RSL and APL in the 　　 editing and collating of related documents.

協助RSL和APL編輯和整理相關文件。

During Normal Operation after Project:

• Take over and hand over the 　　 DCS operations thoroughly.

DCS 日常操作及交接

• Startup / shutdown unit 　　 safely

安全開停車

• Ensure detailed activity is 　　 captured in the Log Book

確保所有詳細活動都在工作日志中

• Knowledge on control 　　 parameter, example Ratio control, cascade control, auto control and 　　 manual control.

了解控制參數、比例控制、串級控制、自動控制和手動控制。

• Basic knowledge on DCS 　　 system configuration and logic, understand how to insure the control 　　 program running as design.

基本了解DCS系統配置和邏輯，了解如何確�？刂瞥绦虬丛O計運行。

• Ensure all Performance Gap 　　 and troubleshooting is captured in the logbook and Shift log. Participate 　　 preliminary root cause analysis of PGR (performance gap report) and 　　 discuss with engineers.

確保所有性能差異和故障排除都記錄在日志中。參與PGR（性能差距報告）的初步根本原因分析，并與工程師討論。

• Detect process abnormality 　　 and equipment abnormality and organize field technician initiate 　　 appropriate actions to ensure the reliability.

檢測工藝異常和設備異常，組織現場技術人員采取適當措施，確�？煽啃�

• Check laboratory analysis, 　　 interpret the results and take corrective actions.

檢查實驗室分析，解釋結果并采取糾正措施。

• Guide other technicians in 　　 operating the unit.

指導外操進行現場操作

• Able to retrieve SIS data to 　　 check on alarms and interlock trigged. Knows the Hazard protected by the 　　 Interlock. Knows the requirement to bypass Interlock.

能夠檢索SIS數據，檢查警報和聯鎖觸發。知道聯鎖保護的危險。知道旁路聯鎖的要求。

• Respond quickly and properly 　　 in time of emergencies.

遇到緊急情況快速正確響應

• Able to perform emergency 　　 shutdown as per the Emergency Procedures

能夠按照緊急程序執行緊急停車

• Coordinate between 　　 Reliability Shift Leader, Asset Performance Leader and technicians 　　 during emergency.

緊急情況下進行現場協調

• Prioritize the work 　　 according to unit strength, ability and urgency of

根據緊急程度、能力以及重要程度安排工作

• Train/coach junior operator.

指導經驗較少的外操

Technical Skills & Competencies

• High EHS standard in a chemical 　　 plant and able to hold accountability of EHS standard
• Knowledge 　　 of unit operations & processes
• Knowledge of DCS system
• Basic knowledge of common 　　 devices in chemical plant (pump, compressor, FF…)
• Familiar with P&ID 　　 drawings and field equipment/instrument types.
• Analytical and 　　 troubleshooting skill
• Knowledge on Interlock Logic 　　 Drawing/Interlock matrix
• Ability to access and 　　 interpret SIS system information.
• Good interpersonal and 　　 communication skills; able to work in a team environment; committed to 　　 safety and environmental compliance excellence.

Experience

• Minimum of 5 years work 　　 experience (2 years for 　　 bachelor) in a chemical, polymer plant or oil refinery.
• Minimum of 2 years work 　　 experience (1 years for 　　 bachelor) in DCS Operating.
• Experience in HCN or similar 　　 high hazard chemical plants is an advantage.
• Experience in 　　 construction/commission/start-up for a new project is an advantage

Education

• Chemical industry related 　　 Secondary Technical School degree or above. College or bachelor 　　 undergraduate preferred.

Language Needed

• Basic English communication 　　 skills is a plus